HRC55 series
- Square end mills
- Ball-nose end mills
- Corner-radius end mills
Cutting tools
Solid carbide end mills
The supplied catalogue documents HRC55, HRC65 and graphite application classes in square, ball-nose and corner-radius series. Final selection depends on workpiece material and hardness, machine rigidity, holder, runout, coolant and cutting conditions.
Tool application boundary
Does an HRC65 end mill guarantee tool life or performance?
No. HRC65 is an application or hardness-class reference, not an unconditional guarantee of tool life, surface finish or output. Actual performance depends on the workpiece material and hardness, tool geometry and coating, machine rigidity, holder and runout, operation type, cutting parameters, coolant strategy and chip evacuation. Jinxi must review the application before recommending a tool or test plan.
Required inputsWorkpiece grade, hardness, operation, machine, holder, coolant and target result.
Engineering reviewTool geometry, coating and starting parameters are selected for the actual application.
No blanket promiseTool life and productivity require controlled trials and comparable operating conditions.
Documented product series
Choose the application class, then confirm the exact tool.
The class names describe the supplied catalogue ranges; they are not a universal tool-life or performance guarantee.
HRC65 series
- Square end mills
- Ball-nose end mills
- Corner-radius end mills
Graphite series
- Square end mills
- Ball-nose end mills
- Corner-radius end mills
Production & inspection
Production evidence follows the tool from grinding to verification.
These images come from the cutting-tool materials previously supplied for the project.
Selection inputs
Provide the machining context—not only a diameter.
Tool recommendation should be tied to the actual workpiece, machine and operation.
WorkpieceMaterial grade and actual hardness.
Tool sizeDiameter, flute length, overall length and corner form.
Machine & holderSpindle, holder, runout and rigidity condition.
OperationSlotting, profiling, finishing, engagement and target surface.
Cutting conditionCoolant, air or dry-cutting context and starting parameters.
Commercial needQuantity, packaging, marking and delivery destination.
Identification & packaging
Close the loop from specification to shipment.
Final identification and packaging should match the agreed series, geometry, quantity and customer requirements. Packaging evidence is shown here so the buyer can review the last step rather than infer it.
- IdentificationSeries and agreed tool details.
- ProtectionIndividual tool protection and shipment preparation.
- VerificationQuantity and agreed documentation checked before release.
Cutting tool FAQ
Questions before a recommendation.
Does HRC55 or HRC65 guarantee tool life?
No. These are catalogue application classes. Tool life depends on workpiece condition, machine, holder, runout, engagement, coolant and cutting parameters.
Which tool forms are documented?
Square, ball-nose and corner-radius series are documented for HRC55, HRC65 and graphite application classes.
What should be sent for selection review?
Provide workpiece material and hardness, operation, requested dimensions, machine and holder context, cutting condition, target finish and quantity.
Next step
Match the tool to the real cutting condition.
Send the application details and requested geometry for project-specific review.